中文版 
ENGLISH
Features
RC8MD Dissolution Tester
● Paddle wobble: 0.5 mm
● Basket wobble: 1.0 mm
● Axial deviation between rotating rod and dissolution vessel: 2.0 mm
● Position deviation of mensuration: ±2.0 mm
● Range of speed regulation:（25－250）rpm
● Speed resolution ratio: 1 rpm
●Stabilizing speed error: ≤ ±1 rpm
● Range of temperature regulation:（5.0－45.0）℃ (＞room temperature)
● Temperature resolution: 0.1 ℃
● Temperature control error: ≤ ±0.3 ℃
● Program-control test procedure: ≤10 groups
● Program-control test procedure: 10 groups
● Program-control sampling times: ≤12 times
● Program-control sampling period: ≤ 99 hrs 59 min
● Print cycle: ≤60 min
● Operation noise: ＜55dB
● Ambient conditions: Ambient temperature (5~35)℃, RH≤80%
● Safety performance: in accordance with national industrial standards.
● Requirement for Power supply: AC 220V 50Hz 4A
● Dimension:650×570×360 mm，
● Weight: approximately 50 kg
RZQ-8D Sampling and collection System
1. Number of sampling access: 8
2. Maximum number of sampling: 15
3. Maximum interval: 99 hours and 59minutes
4. Minimum interval: 1 minute for the first interval, and 4~6 minutes for other intervals (depending on sampling dose and necessity for fluid replacement)
5. Continuous operating time: 99 hours 59 minutes×15
6. Sample filtering cycle: ＜30秒
7. Sampling dose（or amount of fluid replacement）：1ml～10ml
8. Sampling accuracy: ±（10%＋0.1ml）
9. Bore diameter of filtration: columnar Teflon filter with a bore diameter of 10μm for primary filtration; injection filter with a maximum bore diameter of 0.22μm for secondary filtration.
10. Number of sampling access: 8
11. Maximum number of sampling: 15
12. Maximum interval: 99 hours and 59minutes
13. Minimum interval: 1 minute for the first interval, and 4~6 minutes for other intervals (depending on sampling dose and necessity for fluid replacement)
14. Continuous operating time: 99 hours 59 minutes×15
15. Sample filtering cycle: ＜30秒
16. Sampling dose（or amount of fluid replacement）：1ml～10ml
17. Sampling accuracy: ±（10%＋0.1ml）
18. Bore diameter of filtration: columnar Teflon filter with a bore diameter of 10μm for primary filtration; injection filter with a maximum bore diameter of 0.22μm for secondary filtration.
